In this article down the page you can discover more reliable expertise regarding What Would Cause My Electric Water Heater to Stop Working?.
Lots of contemporary houses utilize an electric water heater for their heating system, as a result of its comfort as well as simplicity of use. However, just like any other electric home appliances, issues might develop with its use, all of a sudden. It can be truly aggravating to wake up to a cold shower as opposed to a hot one or having your bathroom with water that isn't warm enough or perhaps also warm. Whatever the situation may be, water heater problems can be fairly aggravating. Luckily, we have actually made a listing of possible services to your water heater concerns. There are a variety of aspects that might cause many of these troubles, maybe a concern with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you turn off the main power supply for safety. Whatever the issue is, getting it repaired should not pose too much of an issue if you follow these steps:
Call A Professional:
If after replacing all damaged components as well as resetting your temperature, the hot water heater still isn't functioning, you might require to call a professional plumber for an expert viewpoint. The problem with your heating system could be that the hot and cold faucets have actually been changed or it may be undersized for the quantity of hot water required in your home. Whatever the instance may be, an expert plumber would help fix the problem.
Inspect Your Power Supply:
As standard as this may seem, it is really necessary. Without sufficient power, your hot water heater will certainly not function. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the breaker stumbled. If the circuit breaker is the concern, simply transform it on and off again. Change any kind of damaged or worn-out fuse. Check the device with power after these adjustments to see if it's now working.
Examine Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't hot enough, you might require to check the temperature settings on your top thermostat. Make certain the circuit breaker is turned off prior to doing anything. Open up the access panel and press the red button for temperature level reset over the thermostat. This should help heat up the water. Turn the breaker back on as well as examine if the trouble has actually been resolved.
Inspect the Burner in the Hot Water Heater:
If it's not a power issue, after that attempt looking into your heating element if it is still functioning. Check each of your burner to ensure the problem isn't with any of them. If any one of them is damaged, replace that part and afterwards examine whether the warm water is back on.
Verdict
Water heater problems are not constantly significant. Most of them result from small problems like a blown fuse or worn-out heating element. Replacing the defective parts should do the trick. Nonetheless, if you are still incapable to fix the issue, give a call to your closest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As an avid reader about How to Troubleshoot and Repair an Electric Water Heater, I thought sharing that excerpt was really useful. Do you know about somebody who is inquisitive about the topic? Feel free to share it. We thank you for reading our article about Hot Water Heater Repair.
See Availability